Table C–1. Error Messages (Continued)
Project has No
Data!
Operator attempted to view a
project with no data.
Select the correct project
when attempting to view.
Overlay Thickness
Exceeds Limits!
When using the Nomograph
function (see page 5–10), the
overlay thickness value must
be between 0 and 10 in. The
operator has entered a value
outside this range.
Enter an overlay thickness
value between 0 and 10 in.
Warning!! Time to
Reach Precision
too high
When using the Precision
function (see page 5–15), the
time required to reach the
selected precision value
exceeds 60 minutes.
Enter a different precision
value or disable the Precision
function.
To Next Page
Loading...
