True ES700 - Page 19

CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 15
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 6: Attach Pedal Tubes (continued):
b) Attach the Front Pedal Tube
Covers using 8 M5x12mm screws.
Hardware Required (Bag 6):
8 M5x12mm Screws
STEP 7: Attach Console:
a
) Slide Console cables through
Console Mast and attach Mast using
2 M8x12mm bolts.
CAUTION: Do not pinch wires!
Hardware Required (Bag 7):
2 M8x12mm Bolts
2 M8x12 Bolts
Ground
Screw Hole
Route Cables Here