138 of 171
Truetness.com / 800.426.6570 / 636.272.7100
CHAPTER 4C: ESCALATE
9
OPERATION
ADVANCED CONSOLE FUNCTIONS:
Diagnostics Menu - Calibration/Test:
is menu contains tools for testing and verifying treadmill operation.
A B
D
E
C
A) Key Test:
When a key is pressed on the console “NONE” will change to indicate which key is being pressed. In the event of a stuck
key, the key that is being engaged will display (the selection buttons are excluded from this test).
B) Telemetry HR:
Use a wireless heart rate strap or simulator to test if the unit is receiving wireless heart rate data. If there is a reading
displayed without the use of a heart rate strap or simulator, there is outside interference from another source.
C) Contact HR:
Ensures the unit is receiving the data by displaying the user’s heart rate when the contact heart rate pads are gripped.
D) Speed/Incline Cal:
Speed/Incline Cal (calibration) is selected by default in this menu. To run a calibration press the enter selection button (E)
and then follow the on screen instructions.
Production Test:
e production test screen is used during the production process and is not used for service or troubleshooting.
is process will take full control of the treadmill and can be dangerous if caution is not taken.
• Calibration can take up to two minutes to complete.
• Do not stand on the treadmill during the calibration procedure.
• Verify that the machine is free of all parts and tools.
• Keep children and animals at a safe distance.
WARNING:
To Next Page
