~ 7 ~
2.6 MOVING THE CARAVAN (HANDSET OPERATION)
The caravan can be moved as required by pressing buttons A, B, C, G, H or I. The caravan will
move in the direction of the arrows printed on these buttons. Pressing opposite button A and I
or C and G will make single axle caravans (only) rotate on their axis. The Electronics Control
System also has a continuous movement capability in that if button B is being pressed then
buttons A or C can be used, alternatively if button H is pressed then buttons G or I can be
used, using this sequence will allow the Powrtouch to redirect the caravan without stopping the
forward or backward motion.
Please note that the speed settings will always default to MAXIMUM – Speed changes
can only be made when the caravan is stationary
2.7 DECREASING AND INCREASING SPEED
To Next Page
Loading...
