TSC Console User Manual

15
4.2 Features Tab - Printer Configuration
Printer Functions
Functions
Description
Calibrate Sensor
Detect media types and the size of the label
RTC Setup
Synchronize printer witn Real Time Clock on PC
Factory Default
Initialize the printer to default settings
Reset Printer
Reboot printer
Print Test Page
Print test page according to the specified label size
and sensor type
Configuration Page
Print printer configurations
Dump Text
Activate the printer to dump mode
Ignore AUTO.BAS
Ignore AUTO.BAS file when printer boot up
Exit Line Mode
Exit the line mode to page mode
Enter Line Mode
Leave page mode and enter line mode
Reset WiFi
Restore the WiFi settings to defaults

TSC Console Specifications

General

Print Resolution	203 DPI
Memory	8 MB Flash, 8 MB SDRAM
Print Method	Thermal Transfer
Maximum Print Width	4.09"
Connectivity	USB
Supported Media Types	Roll feed
Operating Temperature	41 to 104°F
Storage Temperature	-4°F to 122°F
Operating Humidity	25% to 85% non-condensing
Storage Humidity	10 to 90% RH
Power Supply	External universal switching power supply