TSC MB241 Series - Page 74

70
The following paragraph describes the setting options that help optimize the print quality when using the linerless media. The setting options will
automatically appear in the Favorites folder (touch LCD only) after installing the linerless cutter/tear-off module onto the printer.
(for 2.3” LCD models, refer to Advanced section)
Item
Description
Vertical Length Adjustment
Turns on/off the Vertical Length Adjustment function. Setting option: ON / OFF.
Vertical Percentage
Adjusts the label length. This item will not appear if Vertical Length Adjustment is turned off. Setting range: 90
to 115%.
Offset
Specifies the stop position for each operation. Setting range: -203 to 203 dots.
Shift Y
Specifies the amount to shift an image vertically up or down for precise print position on the label. Setting
range: -203 to 203 dots.