Sets how often the printer should be cleaned after printing with the linerless media.
Warning: Turns on/off notification that reminds users to clean the printer if the set mileage is fulfilled. Default
setting: ON.
Interval: Schedules printer maintenance after printing with the linerless media. When the set amount of
mileage is fulfilled, the warning icon ( ) that reminds users to clean the printer will appear on the display
panel. Default setting: 1 km.
Clean Cutter Blade: Lifts up to expose the cutter blade. Select this item to lift up the cutter blade if you need to
clean the blade.
NOTE: Clean Cutter Blade will be displayed in the menu after installing the cutter module on the printer. For
how to clean the linerless cutter blade, please refer to Maintenance for more information.
CAUTION: To avoid the risk of personal injury, keep your hands away from the cutter gate when selecting
Clean Cutter Blade. Selecting this item will lift up the blade.
Reset Counter: Resets the mileage count after cleaning the printer.
To Next Page
Loading...
