TSC MH241 Series User Manual

52
6.5.2 Ehernet
Ethernet configures internal Ethernet configuration and checks the printer’s Ethernet module status, and reset the Ethernet module.
Item
Description
Default
Status
Check the Ethernet IP address and MAC setting status.
N/A
Config.
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Static IP: Use this menu to set the printer’s IP address, subnet mask and gateway.
DHCP
Menu Interface Ethernet
Status
Config

TSC MH241 Series Specifications

General

Resolution	203 dpi
Max. Print Width	104 mm
Interface	Ethernet
Scanning Method	Thermal Transfer/Direct Thermal
Supported Barcode Types	1D Barcodes
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	60°C
Humidity	25-85% non-condensing
Weight	MH241/MH241T/MH241P: 15 kg MH341/MH341T/MH341P: 15 kg MH641/MH641T/MH641P: 15 kg