EasyManuals Logo
Home>TSC>Barcode Reader>MH241 Series

TSC MH241 Series User Manual

TSC MH241 Series
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
66
EN 62368-1:2014/A11:2017
KN 32
KN 35
K60950-1(2011-12)
기기는 업무용(A ) 전자파적합기기로서 판매자 또는 사용자는 점을 주의하시기 바라며,
가정외의 지역에서 사용하는 것을 목적으로 합니다.
GB 4943.1
GB/T9254, Class A
GB 17625.1
此为 A 级产品,在生活环境中,该产品可能会造成无线电干扰,
在这种情况下,可能需要用户对干扰采取切实可行的措施。
Energy Star for Imaging Equipment Version 3.0
IS 13252(Part 1)/
IEC 60950-1
Note: There may have certification differences in the series models, please refer to product label for accuracy.
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power from the AC inlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label
provided by manufacture.

Other manuals for TSC MH241 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC MH241 Series and is the answer not in the manual?

TSC MH241 Series Specifications

General IconGeneral
BrandTSC
ModelMH241 Series
CategoryBarcode Reader
LanguageEnglish

Related product manuals