TSC MH361T Series

- 34 -
5.3 Setting
This “Setting” category can set up the printer settings for TSPL & ZPL2. Tap the “Command Set”
item or press right soft key to switch the TSPL & the ZPL2.
5.3.1 TSPL
This “TSPL” category can set up the printer settings for TSPL2.
Item
Description
Default
Speed
Use this item to set print speed. The each increase or
decrease is 1 ips.
203dpi: 6
300dpi: 4
Setting
Command Set
- TSPL
Speed
Slew Speed
Back Speed
Density
Direction
Print mode
None
Batch Mode
Applicator
Rewinder mode
Peeler Mode
Cutter Mode
Cutter Batch
Offset
Shift X
Shift Y
Reference X
Reference Y
Code Page
Country