TSC MH361T Series

- 36 -
5.3.2 ZPL2
This “ZPL2” category can set up the printer settings for ZPL2.
Item
Description
Default
Darkness
Use this item to setup printing darkness. The available setting
is from 0 to 30, and the step is 1. You may need to adjust your
density based on selected media.
16
Setting
Command Set -
ZPL2
Darkness
Print Speed
Slew Speed
BackFeed Speed
Tear Off
Print Mode
Tear Off
Applicator
Peel Off
Cutter
Rewind
Print Width
List Fonts
List Images
List Formats
List Setup
Control Prefix
Format Prodix
Delimiter Char
Media Power Up
Feed
Calibration
Length
No Motion
Head Close
Feed
Calibration
Length
No Motion
Label Top
Left Position
Reprint Mode
Enabled
Disabled
Format Convert
None
150 -> 300
150 -> 600
200 -> 600
300 -> 600