TSC MH361T Series

- 41 -
5.5.2 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet module
status, and reset the Ethernet module.
Item
Description
Default
Status
Use this menu to check the Ethernet IP address and
MAC setting status.
N/A
Configure
Use this menu to set the Ethernet configure.
DHCP
This item is used to ON or OFF the
DHCP (Dynamic Host Configuration
Protocol) network protocol.
Static IP
Use this menu to set the printer’s IP
address, subnet mask and gateway.
DHCP
5.5.3 Bluetooth
Use this menu to check the Bluetooth status and to set the PIN code.
Note: This subsection will only be visible when the Bluetooth option installed.
Item
Description
Default
Status
This item is used to check the Bluetooth status
N/A
Local Name
This item is used to set the local name for
Bluetooth
N/A
PIN Code
This item is used to set PIN code for Bluetooth
0000
Interface
Ethernet
Status
Configure
DHCP
Static IP
Interface Bluetooth
Status
Local Name
PIN Code