To Next Page
H
Henry HallSep 9, 2025
Why does my TSC MH361T Barcode Reader say 'Carriage Open'?
- BBrandon BerrySep 9, 2025
The 'Carriage Open' message on your TSC Barcode Reader indicates that the printer carriages are open. Please close the print carriages.
Why does my TSC MH361T Barcode Reader say 'Carriage Open'?
The 'Carriage Open' message on your TSC Barcode Reader indicates that the printer carriages are open. Please close the print carriages.
Why is my TSC MH361T Barcode Reader label feeding not stable?
If the label feeding on your TSC Barcode Reader is not stable (skewed) during printing, the media guide might not be touching the edge of the media. If the label is moving to the right, move the label guide to the left. If the label is moving to the left, move the label guide to the right.
Why is my TSC MH361T Barcode Reader printing a gray line on the blank label?
If your TSC Barcode Reader is printing a gray line on the blank label, the print head or platen roller might be dirty. Clean the print head and platen roller.
Why is my TSC MH361T not printing?
Your TSC Barcode Reader might not be printing because the interface cable isn't properly connected, or the wireless or Bluetooth device isn't well connected. Also, the port specified in the Windows driver might be incorrect. Re-connect the cable or try a new one. Reset the wireless device setting. Select the correct printer port in the driver. Ensure the printhead’s harness connector is well connected with the printhead by turning off the printer and plugging the connector again. Check your program for a PRINT command at the end of the file and ensure each command line ends with CRLF.
What to do if my TSC Barcode Reader is missing printing on the left or right side of label?
If your TSC Barcode Reader is missing printing on the left or right side of the label, the label size setup might be wrong. Set the correct label size.
What to do if my TSC MH361T Barcode Reader LCD panel is dark but the LEDs are light?
If the LCD panel on your TSC Barcode Reader is dark but the LEDs are lit, the printer initialization may have been unsuccessful. Turn OFF and ON the printer again and initialize the printer.
Why is my TSC Barcode Reader LCD panel dark and keys not working?
If the LCD panel on your TSC Barcode Reader is dark and the keys are not working, the cable between the main PCB and LCD panel might be loose. Check if the cable between the main PCB and LCD is secured.
How to fix irregular printing on TSC MH361T?
Irregular printing on your TSC Barcode Reader can occur if the printer is in Hex Dump mode or if the RS-232 setting is incorrect. Turn the printer off and on to skip the dump mode. Re-set the Rs-232 setting.
What causes wrinkle problem with TSC MH361T Barcode Reader?
Wrinkling during printing with your TSC Barcode Reader can be caused by incorrect printhead pressure, improper ribbon or media installation, incorrect print density, or incorrect media feeding. Please refer to section 4.2. Set the suitable density for good print quality. Make sure the label guide touches the edge of the media guide.
Why does my TSC MH361T say 'No Ribbon'?
The TSC Barcode Reader might display 'No Ribbon' because the ribbon roll has run out or the ribbon is installed incorrectly. Supply a new ribbon roll and refer to the user’s manual for instructions on reinstalling the ribbon.
General| Brand | TSC |
|---|---|
| Model | MH361T Series |
| Category | Barcode Reader |
| Language | English |
Describes the touch LCD panel, buttons, and status indicators for operating the printer.
Step-by-step guide to connect and set up the printer for first-time use.
Instructions for properly installing a ribbon into the printer.
Procedure for safely removing a used ribbon from the printer.
Step-by-step guide for loading label media into the printer.
Details how to adjust the print head pressure for optimal print quality.
Provides steps to adjust printer mechanisms to prevent ribbon wrinkles.
Explains how to calibrate and configure media sensors for accurate printing.
Tools and procedures for diagnosing printer issues, including print config and self-tests.
Guide to identify and resolve common issues encountered while operating the printer.
Methods and tools for cleaning the printer's internal and external components.
