5.1.3 Power-on Utilities
LED User Interface features a set of utilities which provides quick access to the printer’s mostly used functions.
Follow the procedures below to launch the power-on utilities and select the function you need.
1. Turn off the printer.
2. Press and hold Feed and then turn on the printer. Keep holding Feed. The LED indicator on the control panel will start blinking in
a sequence of patterns that indicates which function is going to be activated.
3. When the LED indicator blinks in the pattern which indicates the function you need, release Feed. The Power-on Utilities will run
the function you select.
The table below describes the sequence of the patterns and their corresponding functions.
To Next Page
Loading...
