TSC TH240 Series User Manual

43
5.3.2.1 Configuration
Item
Description
Print
Common
Configures the printer using the TSPL command set. Refer to 7.1.1 TSPL for more information.
Adjust
Adjusts the print and stop location. Refer to 7.1.1 TSPL for more information.
Media
Configures the parameters that relate to the media type and sets the media sensor.
NOTE: For DH240 series, when using the upper black mark sensor, you must shift the bottom black
mark sensor to the left or right side of the printer to prevent interference and obtain better calibration
result.
Calibration
Configures the parameters that affect the media calibration.
RS232
Configures the settings for RS-232.
Bluetooth
Configures the settings for Bluetooth.
Ethernet
Configures the settings for Ethernet.
802.1X
Sets the 802.1X authentication.
Wi-Fi
Configures the settings for Wi-Fi.
Raw Port Filter
Configures the settings for RAW port filter.
RTC Setup
Sets the date and time for the printer.
5.3.2.2 Emulation
Item
Description
Z
Emulates Zebra printer language and allows users to configure the printer.
D
Emulates Datamax printer language and allows users to configure the printer.

TSC TH240 Series Specifications

General

Brand	TSC
Model	TH240 Series
Category	Barcode Reader
Language	English