TSC TH240 Series User Manual

84
Problem
Possible Cause
Recommended Solution
The printing position of small label is
incorrect
 Media sensor sensitivity is not set
properly.
 Label size is incorrect.
 The parameter Shift Y is incorrect.
 The vertical offset setting in the
driver is incorrect.
 Calibrate the sensor sensitivity again.
 Set the correct label size and gap size.
 Enter LCD menu (or via TSC Console)
to fine tune the parameter of Shift Y.
 If using the software BarTender, please
set the vertical offset in the driver.

TSC TH240 Series Specifications

General

Brand	TSC
Model	TH240 Series
Category	Barcode Reader
Language	English