TSC TTP-244 User Manual

3.3 Ribbon Loading Instructions
1. Place an empty paper core on the ribbon rewind spindle.
2. Insert the left side first. Mount the ribbon rewind paper core on the front hubs.
3. Please be noted that the bigger hub side with 4 ribs must be installed toward
the right side of ribbon mechanism.
4. Install a ribbon on the ribbon supply spindle. Mount the ribbon supply spindle
on the rear hubs.
5. Insert the left side first. Please be noted that the bigger hub side with 4 ribs
must be installed toward the right side of ribbon mechanism.
12

TSC TTP-244 Specifications

General

Print Resolution	203 DPI
Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	4 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Processor	32-bit RISC
Interface	USB
Maximum Print Width	4.09 inches (104 mm)
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, POSTNET
Power Supply	100-240V AC, 50/60Hz