TSC TTP-244M Pro User Manual

8
3. SET UP
3.1 Setting up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer mainframe with the provided printer cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer,
and then plug the power cord into a properly grounded receptable.
Note: Please switch OFF printer power switch prior to plug in the power cord to printer
power jack.

TSC TTP-244M Pro Specifications

General

Brand	TSC
Model	TTP-244M Pro
Category	Barcode Reader
Language	English