2. GETTING STARTED
This printer has been specially packaged to withstand damage in the shipping
process. However, for fear that unexpected damage might occur, upon
receiving the bar code printer, carefully inspect the package and the device. In
case of evident damage, contact the carrier directly to specify the nature and
extent of the damage. Please retain the packaging materials in case you need
to reship the printer.
2.1 Equipment Checklist
One bar code printer unit
One ribbon paper core for ribbon rewind spindle
Two ribbon supply/rewind spindle (2 pcs)
One USB interface cable
One power cord
One Windows labeling software/ Windows driver CD disk
One quick start guide
Separately purchased items may also be included. These additional items may
include:
Labels
Ribbons
Stand-alone keyboard
Cutter module
Peel-off module
If any parts are missing, please contact the Customer Service Department of
your purchased reseller or distributor.
To Next Page
Loading...
Need help?
General
