Why does my TSC Printer skip labels when printing?
If your TSC Printer is skipping labels, try these solutions: * Check if the label size is set up correctly. * Calibrate the sensor using Auto Gap or Manual Gap options. * Clear any dust from the GAP/Black mark sensor using a blower.
What to do if my TSC Printer says 'No Paper'?
If your TSC Printer indicates 'No Paper', consider these solutions: * Supply a new label roll. * Reinstall the label roll, referring to the user manual for guidance. * Calibrate the gap/black mark sensor.
How to fix poor print quality on my TSC Printer?
To resolve poor print quality on your TSC Printer: * Reload the ribbon and media. * Clean the print head and platen roller. * Adjust the print density and print speed. * Run a printer self-test to check the print head test pattern for missing dots. * Change to a proper ribbon or label media. * Adjust the printhead pressure adjustment knob.
Why is my TSC Printer not printing anything on the label?
If your TSC Printer is not printing on the label, consider the following: * Ensure the label and ribbon are loaded correctly, following the loading instructions. * Verify that the ribbon and media are compatible. * Reload the ribbon, ensuring the inked side is correct. * Clean the printhead. * Check that the print density setting is correct.
General| Print Speed | 4 ips / 6 ips |
|---|---|
| Memory | 512 MB Flash, 512 MB SDRAM |
| Interface | USB 2.0, Serial, Ethernet |
| Type | Industrial Printer |
| Print Method | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi |
| Communication Interface | USB 2.0, Serial, Ethernet |
| Label Thickness | 0.003" (0.076 mm) ~ 0.012" (0.305 mm) |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| Operating Temperature | 5 ~ 40°C (41 ~ 104°F) |
| Storage Temperature | -40 ~ 60°C (-40 ~ 140°F) |
| Resolution | 203 dpi |
| Operating Humidity | 20 - 85% RH (non-condensing) |
To Next Page
