TSC TTP-345 User Manual

40
Check if supply is loaded
correctly.
Reload the supply.
Ribbon and media are
incompatible.
Change the ribbon or label
combination.
Check if dust or adhesives are
accumulated on the print head.
Clean the print head.
Check if print density is set
properly.
Adjust the print density and print
speed.
Check print head test pattern if
head element is damaged.
Run printer self-test and check
the print head test pattern if
there is dot missing in the
pattern.

TSC TTP-345 Specifications

General

Print Method	Thermal Transfer
Resolution	300 dpi
Max Print Speed	5 ips
Max Print Length	90" (2286 mm)
Memory	8 MB Flash
Interface	USB 2.0, RS-232
Power Supply	External universal switching power supply