TSI Incorporated Certifier FA Plus - Parts List

Certifier
®
FA Plus Test System
2
Caution
 To avoid inaccurate test readings, do not obstruct tubing or inlet or exhaust ports,
and always use dry gas.
 To avoid damage to the Certifier
®
FA Test System components, always use
bacteria filters upstream of the flow modules, and always cap flow module ports
when not in use.
 The Certifier FA Plus is not a medical device under the Medical Device Directive or
FDA 510(k) and in no situation should be used for human measurements.
1.1 Parts List
Carefully unpack the test system components from the shipping container. Check the
individual parts against the packing list and notify TSI immediately if anything is missing
or damaged. Table 1 summarizes the Certifier
®
FA Test System components and part
numbers shown in Figure 1, 2, and 3.
Figure 1. Certifier
®
FA Test System High Flow Standard Kit (4080)
1
2
3
6
4
5
7
8
9
10
11
12
13
14
15
19
17
16
18