TSI Instruments Aerotrak 9303 - Settings Menu

2-12 AeroTrak
®
Handheld and Remote Airborne Particle Counters
4. Lift the bottom (side
towards pump) of the
optics block assembly
enough to get access to
the silicon tube
connecting the pump to
the optics block. Use a
needle-nose plier and
pull the tube off the
optics block.
C A U T I O N
The electronic circuits within this instrument are susceptible to
electro-static discharge (ESD) damage. Use ESD precautions to
avoid damage.
• Use only a table top with a grounded conducting surface.
• Wear a grounded, static-discharging wrist strap.