123
Appendix D
Access Codes / Passcode
The Model RPC30 Room Pressure Controller may prompt you to enter an access code to change
the room mode or to enter the menu system. The access code screen is shown below in
Figure 42. To enter the access code, type in the 4-digit passcode shown below and press Save.
The PresSura room controllers feature two levels of passcode access:
To change the room mode, the default passcode is 0317.
To access the menu system, the default passcode is 2887.
ROOM MODE and MENU passcodes may have been changed. Contact TSI to
recover a lost passcode.
ROOM MODE and MENU passcodes may have been changed. Contact TSI to
recover a lost passcode.
Figure 42. Access Code Screen
To Next Page
Loading...
