EasyManua.ls Logo

TurboChef Eco - ONETOUCH CONTROLLER OPERATION; Managing the OneTouch Cooking Process and Alerts

TurboChef Eco
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ONETOUCH CONTROLLER OPERATION
Step 5: Cooking
Note: To immediately stop a cook cycle, touch the red “X.
CAUTION: Opening the oven door while the cook timer
is counting down could shorten the lifespan of critical oven
components.
Note: If the oven door is opened during a cook cycle, the cycle will
pause until the door is closed.
Step 7: Check/Remove Food from Oven
WARNING: Dish/inside of oven and door are hot!
Step 4: Place Food in the Oven and Select a Recipe
Step 6: Cooking Alerts
Note: Some recipes may include alerts that require action mid-cook.
Step 8: Cooling Down
When finished cooking for the day, touch the power button (bottom
left corner) to begin cooling down.
Figure 10: Recipe Selection
Figure 11: Cooking
Figure 12: Mid-cook Alert
Figure 13: Check Food Timer
Figure 14: Off/Cooling Down
WARNING: Inside of oven and oven door are hot!
ECO-1001 / Revision G / August 2023

Table of Contents

Other manuals for TurboChef Eco

Related product manuals