TurboChef Eco - ONETOUCH CONTROLLER OPERATION; Placing Recipes into Groups and Sorting

17
ONETOUCH CONTROLLER OPERATION
10. Select which group(s) to which the recipe will be
added (Figure 30, below).
11. Touch “Next” (or “Skip” if no groups are
selected.
Adding a Recipe to a Group
NOTE: At any time, touch the “X” in the top-right
corner to cancel the action of adding a recipe.
From the group select screen:
1. Select a group for which you want to add or
create a recipe.
NOTE: To create a recipe without selecting a
group, select the “all recipes” button.
2. Touch the Edit button in the top-right corner of
the screen.
If the edit button is not present, verify it is
enabled in the Settings menu (see page 12).
3. Touch the “+Recipe” button (Figure 31, above).
4. Select “Existing”.
5. Select a recipe (or recipes) to add to the group
(Figure 32, below).
NOTE: Only recipes with set temperatures
that match the group set temperature will be
selectable.
6. Touch “Next.”
7. Sort recipes in the group by holding/dragging
items in place. You can also sort in alphabetical
order using the “A/Z” button.
8. Touch “Save”.
3
Figure 30: Select Groups to Place Recipe Into
Figure 31: Add Recipe to Group
Figure 32: Select Groups to Place Recipe Into
Figure 33: Sort Recipes in Group
ECO-1001 / Revision G / August 2023ECO-1001 / Revision G / August 2023