16
ONETOUCH CONTROLLER OPERATION
5. Input the recipe name and touch the blue arrow
button to continue (Figure 26, below).
6. Input keywords for the search option and touch
the blue arrow button to continue (Figure 27).
7. Select an image and touch the blue “Next”button
(Figure 28, below).
NOTE: If you have a USB drive with image files
inside a folder named “Images,” insert it from this
screen and select “USB” to assign the image.
8. Input the recipe temperature and touch the blue
arrow button to continue.
NOTE: This option will only appear if you
opted to create a recipe from the “All Recipes”
screen. Otherwise, the recipe temperature will be
applied from the group from which “+Recipe”
was selected.
9. Add cook settings:
a. Touch the “+” button to add a stage.
b. Touch the stage to reorder it or to edit cook
settings including:
- Cook time per stage
- Percent air per stage
- Percent microwave per stage
c. Touch the trash can to delete a stage.
d. Touch the note bubble to add a cooking
note that will appear in the cook cycle
between stages. See step 6 on page 10 for
more details.
e. Touch the left or right arrows to rearrange
stages.
f. Touch “Cook” to perform a test cook.
g. Touch “Save” to continue.
h. Touch the back arrow to return to the
previous step (see step 29, above).
Figure 26: New Recipe Name
Figure 27: New Recipe Keywords
Figure 28: Select Image for New Recipe
a
c
d
e
f
g
b
h
Figure 29: New Recipe Cook Settings
ECO-1001 / Revision G / August 2023
To Next Page
Loading...
