TurboChef Eco - Delete a Group; Move a Group

31
LEGACY CONTROLLER OPERATION
2. Select a Group.
3. Select one of the options:
a. To edit a group name, touch “Name Group.”
b. Using the keypad, enter the new group
name. Touch “ENTER” to save changes.
NOTE: Touch the “123” icon to access numbers
and symbols.
NOTE: Touch the icon to change case between:
- Uppercase, blue icon
- Lowercase, gray icon
Delete a Group
To delete a group,
1. Place the oven in Edit Mode.
2. Touch the group to delete.
3. To delete a group, touch “Delete Group.”
NOTE: Deleting a group will delete all items in
the group.
Move a Group
To move a group to another location,
1. Place the oven in Edit Mode.
2. Touch the Group to move.
Continued on next page...
ECO-1001 / Revision G / August 2023ECO-1001 / Revision G / August 2023