14
ONETOUCH CONTROLLER OPERATION
Edit Mode: OneTouch Controller
To enable Edit Mode,
1. Touch the Settings icon (page 8)
2. Touch “Login” to access the Operation Settings
screen. When prompted, enter the passcode
9 4 2 8 and then touch “Enter.”
3. Set the “Editing” toggle to the on position.
The “Editing” icon will appear on the top-right corner
of the screen when in menu mode (see page 8). When
“Editing” is touched the operator can create, delete,
move, or edit a group or item.
Creating a Group
NOTE: At any time, touch the “X” in the top-right
corner to cancel the action of creating a group.
From the group select screen:
1. Touch the Edit button in the top-right corner of
the screen (Figure 18, above).
If the edit button is not present, verify it is
enabled in the Settings menu (see page 12).
2. Touch the “+Group” button (Figure 18, above).
3. Input the group name and touch the blue arrow
button to continue (Figure 19, below).
4. Select an image and touch the blue “Save”
button (Figure 20, below).
NOTE: If you have a USB drive with image files
inside a folder named “Images,” insert it from this
screen and select “USB” to assign the image.
5. Add recipes (or subgroups) to the group by
selecting/deselecting each recipe, and click the
blue “Next” button.
1
2
Figure 18: Edit Mode: Create Group
Figure 19: Name New Group
Figure 20: Select Group Image
Figure 21: Add Recipes/Subgroups
ECO-1001 / Revision G / August 2023
To Next Page
Loading...
