23
LEGACY CONTROLLER OPERATION
Manual Cook Mode: Legacy Controller
Manual Cook Mode allows cooking “on the fly,” whereas Menu Cook Mode (page 20) allows cooking from
preset cook settings. To access Manual Mode, touch the Manual icon when the oven is off or cooling down
(page 22) or touch the Menu/Manual toggle on the on the Menu Mode screen.
NOTE: If the “Manual” icon is not present, see page 25 to make it appear.
1. Set Temperature
Touch to change the set temperature. The
temperature range is 300–540°F (149–282°C).
2. Events
Manual Mode can store six unique cook settings,
called events. Touch “Events” to view settings for
events 1 through 6.
3. % Air
% Air determines the amount of airflow. The
more air, the more the product will brown or
crisp. % Air can be set from 10-100% in 10%
increments.
4. % Microwave
% Microwave determines the amount of
microwave, and can be set from 0-100% in
10% increments. For example, 50% means
the microwave system will remain on for five
continuous seconds for every ten seconds during
the cook cycle.
5. Time
Time can be set from 0-15 minutes. There are four
time icons. The first allows the operator to enter
the time manually. The others allow the operator
to add time in 5, 15, or 60 second increments.
6. Cook
Touch to cook.
NOTE: The oven may require additional
warming time before cooking can be performed.
7. Save to Menu
If you want to save a manual mode setting into
the oven menu, touch “Save to Menu.” All six
events will be added together as one menu recipe
item, and the cook times for each event will be
summed and divided into percentages of one
cook cycle.
Continued on next page...
Figure 46: Legacy Manual Mode
1
3
4
5
6
7
2
ECO-1001 / Revision G / August 2023ECO-1001 / Revision G / August 2023
To Next Page
Loading...
