EasyManua.ls Logo

TurboChef Eco - LEGACY CONTROLLER OPERATION; Legacy Menu Cook Mode Step-by-Step Guide; Completing Legacy Menu Cook Mode

TurboChef Eco
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
LEGACY CONTROLLER OPERATION
Step 7: Cooking
NOTE: Touch “More Groups” to view additional groups.
Step 5: Select a Group
Step 8: Check/Remove Food from Oven
Step 6: Select an Item
NOTE: Touch “More Items” to view additional items.
Step 4: Place Food in the Oven
WARNING: Inside of oven and oven door are hot!
Figure 40: Group Selection
Figure 41: Recipe Selection
Figure 42: Cooking
Figure 43: Remove Food
Note: To immediately terminate a cook cycle, touch “STOP.
Note: If the oven door is opened during a cook cycle, the cycle will
pause until the door is closed. Touch “YES” to resume.
WARNING: Dish/inside of oven and door are hot!
ECO-1001 / Revision G / August 2023ECO-1001 / Revision G / August 2023

Table of Contents

Other manuals for TurboChef Eco

Related product manuals