7
THEORY OF OPERATION
Events
A single operational element that is a part of a Recipe. Each Recipe may have up to six Events depending
on programming. Each Event lasts a percentage of the Total Cook Time and can be set between 0 and
100% of the Total Cook Time. The sum of all the Event Percent (%) Times must equal 100%.
Total Cook Time
The total duration of a Recipe.
Percentage (%) Time
An event subset that specifies the duration of the Event.
Percentage (%) Air
An event subset that specifies the relative amount of impingement airflow (speed of convection motor)
during the E
vent. Valid between 10 and 100%.
: Maximum 100% = 7100 RPM Blower Motor Speed. Blower Motor Speed scale is linear.
Percentage (%) Microwave (MW)
An event subset specifying the microwave cycle (on time) during the Event. Valid between 0 and 100%.
Fault Code
A code assigned to an Event that the Control considers to be a failure. Upon discovering a Fault, the
Control will display the Fault Code and a brief description of the failure. The Control will also increment
the Fault Code Counter.
Error Message
A message that is displayed when an unusual event occurs. The Control will display the Error Message
only when it occurs. Error Messages are not logged in the Fault Code Counter.
To Next Page
Loading...
Need help?
General
