turck FEN20-16DXP - EtherNet;IP Configuration (Rockwell)

15
V01.00 | 2018/08
5 EtherNet/IP™ Conguration (Rockwell)
It is assumed that there is working knowledge of RS Logix Desinger from Rockwell.
The FEN20 is configured on the EtherNet/IP™ network using either:
■
Generic device profile or
■
EDS file
The single generic device profile is available with the Logix5000 controllers. The collection of
the generic device profiles of the Turck devices is called a “Turck Catalog File”.
5.1 Turck Catalog Files
 Turck devices are assigned pre-defined configurations using the generic device profile. The
device configuration contains following information, as an example:
 The collection of the predefined configurations is saved as an L5K file and called the catalog
file.
 There are several different catalog files:
■
Turck_BLOCK_STATIONS , contains all block block IO station configurations
■
BL20-E Catalog file, contains all BL20 IO module and BL20-E-GW-EN configrations
■
BL67 Catalog file, contains all BL67 IO module and BL67-GW-EN configurations
NOTE
Refer to document “How to Configure TBEN-Lx in RSLogix5000 Using Catalog File”.
It contains detailed description of using the catalog files to configure TBEN-L, TBEN-S,
FEN20 and BLCEN.