18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
EtherNet/IP™ Configuration (Rockwell)
5.3 Conguration with EDS File
The following example shows configuration an FEN20 device with a Rockwell PLC utilizing
the EDS file.
Install EDS file using the Logix Designer menu.
Select “New Module” in the Controller Organizer.
Highlight device to add to the network and click “Create”.
Enter device Name and Ethernet Address fields.
To Next Page
Loading...
