17
V01.00 | 2018/08
Click on the dropped FEN20 device
Insert the “Name” and “IP Address” into the following fields:
Under Controller Controller Tags, expand “FEN20_4DIP_4DXP:C.Data” tag
The device configuration tag provides configuration options that may be selected / modified
at this point
NOTE
Turck catalog file advantages are:
■
The FEN20 configuration data is saved into the controller and downloaded to the
device whenever the connection between the PLC and the device is established.
■
The device replacement is seamless as configuration data is downloaded to new
device
■
The device configuration does not depend on the EDS file.
To Next Page
Loading...
