turck FEN20-16DXP User Manual

9
V01.00 | 2018/08
4.3 Service Tool Features
The Service tool displays the assigned IP addresses of devices on the network:
Overview of Features
■
F5 – Network Search function is used to discover Turck devices connected to the same physi-
cal network segment
■
F2 – Change device IP address when device is set to PGM or PGM_DHCP mode, or assign
device a PROFINET name
■
F3 – Wink command - flashes BUS LED of the highlighted device
■
F4 – Action button - used to reset the device to the factory default setting
■
Clipboard – copies selected connection
■
Language – Selects between English and German text
■
Expert View - Enables / disables advanced functions
■
F6 – DHCP server
■
F7 – EtherNet/IP™ configuration page
■
F8 – Device ARGEE info
4.3.1 Assigning an IP Address using Turck Service Tool
 Click F5 – Search network
 Highlight the device to be assigned / changed an IP address
Abb. 1:
 Click F2 – Enter the IP address, Netmask and Gateway addresses.

turck FEN20-16DXP Specifications

General

Brand	turck
Model	FEN20-16DXP
Category	Controller
Language	English