turck FEN20-16DXP - PROFINET Configuration

21
V01.00 | 2018/08
6 PROFINET Conguration
6.1 GE Procy Machine Edition Setup
It is assumed that there is working knowledge of GE Procy Machine Edition. If not, please refer
to the “GE Procy Machine Edition” Manual.
6.1.1 Create New GE Project
 Create a New project in Proficy using New Project Wizard or Open Project
 File  New Project
 For a new project, insert the Project Name, Project Template, and Project location. When done
click “OK”.
 Once the project is in Proficy, Right click on the Processor and select the CPU. Click “OK”.