turck FEN20-16DXP - Modbus TCP Configuration

29
V01.00 | 2018/08
7 Modbus TCP Conguration
The Modbus TCP project and configuration of the FEN20 is shown utilizing Turck’s TX500 HMI/
PLC platform, which supports:
■
IEC 61131 multitasking PLC runtime utilizing CODESYS v3.5.8.1 PLC
■
20 MB program/data memory
■
32 kB non-volatile memory
■
PROFINET Controller (master)
■
EtherNet/IP™™ Scanner (master)
■
Modbus TCP Client (master)
■
Modbus RTU Client (master)
■
CANopen Master (optional via plug-in module)
■
Modbus TCP Server (slave)
■
Modbus RTU Server (slave)
■
OPC UA Server
■
Standard Ethernet TCP/IP und UDP/IP communication
■
Serial RS232, RS485 and RS422 communication
Network topology used in the project: