turck FEN20-16DXP User Manual

3
V01.00 | 2018/08
1 General Information 4
1.1 About these Instructions 4
1.2 Explanation of Symbols Used 4
1.3 Additional Documents 4
1.4 Feedback about these Instructions 4
2 Notes on the Product 5
2.1 Product Identication 5
2.2 Manufacturer and Service 5
3 FEN20 Product Family 6
3.1 Denition of Terms 6
4 FEN20 IP Address Setup 8
4.1 FEN20-4DIP-4DXP 8
4.2 Downloading Turck Service Tool 8
4.3 Service Tool Features 9
4.3.1 Assigning an IP Address using Turck Service Tool 9
4.4 Assigning an IP Address using Rockwell BOOTP/DHCP 10
4.5 FEN20-16DXP 12
4.5.1 Modes of Operation 12
5 EtherNet/IP™ Conguration (Rockwell) 15
5.1 Turck Catalog Files 15
5.2 Conguration with Catalog File 16
5.3 Conguration with EDS File 18
6 PROFINET Conguration 21
6.1 GE Procy Machine Edition Setup 21
6.1.1 Create New GE Project 21
6.1.2 Add the FEN20 Device 24
6.1.3 Assign FEN20 Name and IP Address 25
6.1.4 Installing GSD / GSDML Files in the Hardware Conguration 26
6.1.5 Adding a PROFINET Device onto the Network. 27
7 Modbus TCP Conguration 30
7.1 Create TX500 Modbus TCP Master Project 31
7.1.1 Add Ethernet Adapter 32
7.1.2 Add Modbus Master 34
7.1.3 Add Modbus TCP Slave 37
7.1.4 Congure FEN20 IO Data Map 38
Table of Contents

turck FEN20-16DXP Specifications

General

Brand	turck
Model	FEN20-16DXP
Category	Controller
Language	English