4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
General Information
1 General Information
1.1 About these Instructions
These operating instructions describe the structure, functions and the use of the product and
will help you to operate the product as intended. Read these instructions carefully before using
the product. This is to avoid possible damage to persons, property or the device. Retain the in-
structions for future use during the service life of the product. If the product is passed on, pass
on these instructions as well.
1.2 Target groups
This document is written for specially trained personnel, and must be read carefully by anyone
who is responsible for the mounting, commissioning, operation, maintenance, disassembly or
disposal of the device.
1.3 Explanation of Symbols Used
The following symbols are used in these instructions
DANGER
DANGER indicates an immediately dangerous situation, with high risk, the death or
severe injury, if not avoided.
WARNING
WARNING indicates a potentially dangerous situation with medium risk, the death or
severe injury, if not avoided.
ATTENTION
ATTENTION indicates a situation that may lead to property damage, if it is not avoided.
NOTE
In NOTES you find tips, recommendations and important information. The notes facili-
tate work, provide more information on specific actions and help to avoid overtime by
not following the correct procedure.
CALL TO ACTION
This symbol identifies steps that the user has to perform.
RESULTS OF ACTION
This symbol identifies relevant results of steps
1.4 Additional Documents
The following additional documents are available online at www.turck.com:
■
Data sheets
1.5 Feedback about these Instructions
We make every effort to ensure that these instructions are as informative and as clear as pos-
sible. If you have any suggestions for improving the design or if some information is missing in
the document, please send your suggestions to techdoc@turck.com.
To Next Page
Loading...
Need help?
General
