turck FEN20-16DXP - Add Modbus TCP Slave

36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Modbus TCP Configuration
7.1.3 Add Modbus TCP Slave
The next part shows how to configure FEN20-4DIP-4DXP as the Modbus TCP slave. The same
procedure is used for any other Modbus TCP slave device.
 At “TX500_Modbus_TCP_Master”, right-click and select “Add Device…”.
 Select “Modbus TCP Slave” by 3S.
 Enter “FEN20_4DIP_4DXP” into “Name” field.
 Click “Add Device” , exit.
 At FEN20 in the device organizer, double-click to open the device property page.
 At “General” tab, enter the IP address of the FEN20-4DIP-4DXP into “Slave IP address”.
 Assign 1 to “Unit-ID” (each device has unique Unit-ID number).