7
V01.00 | 2018/08
Modbus TCP or PROFINET based control system.
FLC solutions by Turck are made possible using ARGEE (A Really Great Engineering Envi-
ronment), a web-based programming environment that allows users to set conditions and
actions directly at the field level. By utilizing HTML5, Turck provides a complete engineering
environment for users to write, run, simulate, debug, and monitor code, all without requi-
ring the use of a PLC.
ū
BEEP Backplane Ethernet Extension Protocol
BEEP is a new technology feature of many Turck Multiprotocol digital block I/O modules.
BEEP allows a network of up to 33 devices (1 Master + 32 Slaves) or 480 bytes of data, to
appear to the PLC as a single device on a single connection using a single IP Address of the
Master.
NOTE
BEEP is supported by the following FEN20 devices that have firmware revision:
■
V 3.3.4.0 FEN20-4DIP-4DXP, FEN20-4DIN-4DXN
■
In progress FEN20-16DXP
■
not supported FEN20-EN1, FEN20-EN1-DIN
Refer to “ARGEE Reference Manual” for further information on FLC.
Refer to “BEEP Reference Manual” for further information on BEEP.
To Next Page
Loading...
Need help?
General
