Hans Turck GmbH & Co. KG • Tel. +49 (0) 208/4952-0 • Fax +49 (0) 208/4952-264
2
Pressure Sensors Series PS…
1 Introduction
Dear Customer
We would like to thank you for choosing our product.
The sensors can be programmed on-site for many different applications.
In order to fully use the wide range of functions, we kindly request you to fol-
low the guidelines:
Any person entrusted with the setup or operation of the device, must have
read and understood this operation manual, in particular all safety notes.
2 Safety notes
2.1 General information
In order to ensure safe operation, the device may only be operated in ac-
cordance to the specifications stated in this operation manual. Furthermore,
all legal and safety regulations concerning this specific application should be
observed.
This also applies to the use of accessories.
2.2 Correct use to the intended purpose
These devices are designed for indication and monitoring of process variables.
All other forms of usage do not comply with the intended purpose.
These sensors may not be used solely as means for prevention of dangerous
machine and system conditions. Machines and systems must be constructed in
such a way, that faulty states cannot lead to a dangerous situation for the ope-
rating staff (e.g. due to independent limit switches, mechanical interlocking
devices, etc.).
2.3 Qualied sta
The devices may only be installed, connected, set up and operated by qualified
staff and in compliance with the technical specifications.
Qualified staff is defined as persons, who are familiar with set-up, mounting,
start-up and operation of this device and who possess a recognized degree or
certificate of appropriate professional training.
To Next Page
Loading...
Need help?
General
