Tuthill PD Plus - Recommended Lubricants; Recommended Lubricants for Rotary Blowers and Vacuum Boosters

Manual 2007 Rev B p/n 2007
41
RECOMMENDED LUBRICANTS FOR ROTARY BLOWERS AND VACUUM
BOOSTERS
TUTHILL VISCOSITY GRADE ISO 100
Specific Gravity
16° C (62° F)
0.859
Viscosity
40° C (104o F)
91.8 cSt
Viscosity
100° C (212° F)
13.1 cSt
Viscosity Index 142
Pour Point-51° C (-60° F)
Flash Point246° C (475° F)
Copper Corrosion Rating1A
RECOMMENDED SYNTHETIC BASED LUBRICANTS FOR BLOWERS
AMBIENT
TEMPERATURE
ISO 150
0.865
142.7 cSt
RECOMMENDED SYNTHETIC BASED, FOOD GRADE LUBRICANTS FOR BLOWERS
AMBIENT
TEMPERATURE
LUBRICANT MEETING U.S. FDA REGULATION
21 CFR 178.3570 GOVERNING PETROLEUM
PRODUCTS WHICH MAY HAVE INCIDENTAL
CONTACT WITH FOOD, AND USDA H1
REQUIREMENTS
LUBRICANT MEETING U.S. FDA
REGULATIONS 21 CFR 172.878 AND
178.3620(A) FOR DIRECT AND INDIRECT
FOOD CONTACT
18.0 cSt
0° to 32°F
(-18° to 0°C)
PneuLube™ FG (ISO 100) CONSULT FACTORY
32° to 90°F
(0° to 32°C)
90° to 120°F*
(32° to 50°C)
RECOMMENDED LUBRICANTS FOR M-D VACUUM BOOSTERS
140
-51° C (-60° F)
246° C (475° F)
1A
PneuLube™ (ISO 100)
0° to 32°F
(-18° to 0°C)
32° to 90°F
(0° to 32°C)
90° to 120°F*
(32° to 50°C)
REQUIREMENTS
• Suitable for high vacuum service
• 100 cSt @ 40°C
• Vapor pressure of 1 micron or less @ 70°F (21°C)
• Straight mineral (no additives) or PAO synthetic oil
RECOMMENDED LUBRICANTS
12