Tuttnauer 2840 EL-D - GENERAL; Incoming Inspection; Warranty; Warranty Statement

To Next Page

To Previous Page

Page 4 of 77

TABLE OF CONTENT (Cont.)

DRAWINGS PAGE NO.

FRONT VIEW ...................................................................................................................... 17

REAR VIEW ......................................................................................................................... 18

Main Page

Table of Contents2
General6
Incoming Inspection6
Warranty6
Warranty Statement6
Safety Instructions8
Technical Data10
Introduction10
Storage Conditions11
Operating Conditions11
Specifications12
Electrical Data13
Utilities14
Environment Emission Information14
Construction14
Loading Capacities14
Safety Features15
Symbol Description15
Water Quality16
Directives and Standards17
Control Panel20
Control Panel Drawing20
Description and Functions of the Front Panel Keyboard21
Displayed Error Messages / Symbols23
Displayed Operational Messages / Symbols24
Description of Programs25
Water Inlet25
Heat25
Sterilization25
Exhaust25
Cooling25
Sealed Bottles (Cooling with Compressed Air)25
Unsealed Bottles (Cooling Without Compressed Air)25
Sterilization Programs26
Operations Sequence27
Screens28
Screens Following a Complete Successfully Cycle "Cycle Ended28
Screens Following Aborted Cycles after Complete Sterilization Stage29
Screens Following a Fail Cycle30
Printer31
Printer Output31
Printer Handling33
Installation36
Placing36
Lifting and Carrying36
Filling the Mineral-Free Water Reservoir37
Preparation before Sterilization39
Instruments39
Tubing41
Liquids41
Operating Instructions42
Turning on the Autoclave42
Opening the Door42
Loading42
Operations42
Unloading44
Stopping the Process and Canceling the ERROR Message44
Cycle by Clock Mode (Start Cycle by Clock)44
Checking and Changing Parameters and Other Data45
Directories and Subdirectories45
Table of Parameters46
Entering the Main Menu47
Cycle Parameters (Custom Program = Duplicate Program)49
Cycle Parameters -- Create Pulse50
Cycle Parameters --Heating50
Cycle Parameters --Cooling51
Cycle Parameters --Exhaust51
Cycle Parameters --Ending52
Cycle Parameters --Global52
System Parameters53
History53
Maintenance56
Advanced Options61
Version Information63
Service and Maintenance Instructions66
Preventive and Scheduled Maintenance66
Draining the Reservoirs68
Cleaning the Air Jet69
Replacing the Door Gasket70
Checking the Safety Valve70
Cleaning the Water Outlet Strainer71
Water Sensor Cleaning73

Tuttnauer 2840 EL-D - GENERAL; Incoming Inspection; Warranty; Warranty Statement

Table of Contents

Related product manuals