Why is there a loud noise coming from the reservoir of my Tuttnauer 3870E?
If there is a loud noise coming from the reservoir of your Tuttnauer Laboratory Equipment, the sterilization temperature might be set too high. The maximum setting is 274ºF (134ºC).
How do I fix a Tuttnauer Laboratory Equipment printer that doesn't print?
If the printer of your Tuttnauer Laboratory Equipment does not print, ensure the paper is inserted in the printer. If the printer prints a test printout, the printer is O.K. and there is a problem with the electronics. Contact your dealer to solve the problem. If the printer does not print the test printout, there is a problem with the printer. Contact your dealer to solve the problem.
What to do if the keyboard of my Tuttnauer 3870E does not respond?
If the keyboard of your Tuttnauer Laboratory Equipment does not respond, press the STOP key for 2 seconds to abort any program that may still be running.
How to troubleshoot a Tuttnauer 3870E Laboratory Equipment system that shows no response when turned on?
If your Tuttnauer Laboratory Equipment does not respond when you turn it on, try the following: First, check and fix all connections. If the issue persists, replace any faulty cables, connectors, or the power switch.
Details the manufacturer's warranty coverage for components and assembly.
Details the functions of program and other keys on the control panel.
Lists common messages and associated safety precautions.
Details the settings and sequence for sterilizing unwrapped instruments.
Settings and sequence for sterilizing wrapped instruments and porous loads.
Settings and sequence for sterilizing glassware with slow exhaust.
Guidelines for safe electrical connection and grounding.
Guidelines for safely loading and unloading items for sterilization.
Steps for initial setup, filling water, and selecting a sterilization program.
Instructions on starting the autoclave, monitoring stages, and changing parameters.
Overview of daily, weekly, and periodic maintenance tasks.
Instructions for cleaning the air jet to prevent sterilization failures.
Procedure for cleaning the autoclave using Chamber Brite.
Solutions for when the autoclave is unresponsive.
Troubleshooting steps for the 'Low Heat' error message.
Steps to resolve the 'Low Water' indicator.
Solutions for when the 'Low Pressure' message appears.
Troubleshooting for the 'High Temperature' error.
Steps to resolve the 'High Pressure' error message.
General| Type | Autoclave |
|---|---|
| Model | 3870E |
| Number of Trays | 3 |
| Weight | 240 lbs |
| Chamber Material | Stainless Steel |
| Sterilization Time Range | 4-60 Minutes |
| Sterilization Temperature Range | 121°C |
| Power Supply | 230V |
| Power Consumption | 1600 W |
| Dimensions (WxDxH) | 25 in x 29 in x 21 in |
To Next Page
