TVLogic F-10A User Manual

Field Production Monitor
13
05 MENU OPERATIONS
[2] COLOR
COLOR같이 F-10A
STANDARD
VIDEO RANGE
PEAK LUMINANCE
BLACK LEVEL
COLOR GAMUT
COLOR TEMP
EOTF
LOCAL DIMMING
EETF
HLG SG
SG
CAM LUT
CAM LUT THR
UHD
LIMITED 109
100
0.001
BT.2020
6500K
2.4
OFF
OFF
OFF
OFF
OFF
PAG E (1/2)
• EETF (Electrical-Electrical Fransfer Function)
- Used to display the HDR image(without clipping)
within the actual luminance range (black level
and peak luminance) that the monitor can
express. In the Auto mode, the HDR image is
converted within the range of set peak luminance
and black level. In the OFF mode, the video
signal outside of the set range is clipped.
- Available modes are OFF and AUTO.
- Available only when the EOTF is set to PQ or
SLOG3.
# The submenus may be activated in the User1/2/3
mode only.
• HLG SG (HLG System Gamma)
- Used to set the System Gamma of HLG mode.
- In the Auto mode, the value of the System
Gamma changes automatically according to the
previously set peak luminance. When it is OFF,
the value is set to default value of 1.2.
- Activates only when the EOTF is set to HLG.
# The submenus may be activated in the User1/2/3
mode only.
• SG (System Gamma)
- The System Gamma of HLG is automatically
calculated and displayed according to the set
peak luminance.
- Activates only when the EOTF is set to HLG and
the HLG SG is Auto.
• CAM LUT (Camera LUT)
- Used to change the Camera LUT.
- Available LUTs are OFF, LOG-C, C-LOG, S-LOG
1,2,3 and REDGamma 3,4.
• CAM LUT THROUGH (Camera LUT Throughout)
- Apply the currently applied LUT to Throughout.
- The CAM LUT throughout function is only
available in SDI in/out selectable port.

TVLogic F-10A Specifications

General

Brand	TVLogic
Model	F-10A
Category	Monitor
Language	English