Multi Format LCD Monitor
39
Other Functions
[1] ANALOG BUTTON
This product is capable of processing all input signals usable in ANALOG mode.
The Analog input settings are as follows:
1. Press the ANALOG button on the front of the product and activate the menu below :
2. Use [UP]/[DOWN] buttons to to select desired input source, then enter to conrm.
3. Input signal resolution displays on the bottom of OSD menu.
4. Press ANALOG button again to remove the OSD menu from display.
5. Menu will be disappeared when time set is over from the screen.
COMPOSITE 1
COMPOSITE 2
COMPOSITE 3
S-VIDEO
COMPONENT
RGB
DVI ANALOG
DVI DIGITAL
HDMI
NO VIDEO
To Next Page
Loading...
Need help?
General
