Tyco kENDALL KANGAROO ePump - General Information

ENG2
Figure 1A. KANGAROO ePump features, front and rear views.
Figure 1B. KANGAROO ePump Pump Set loading area.
'FFEJOH4FU
-PBEJOH"SFB
1PMF$MBNQ
'FFEJOH4FU$BQUVSF
Section I – General Information
The KANGAROO ePump
TM
enteral feeding pump is a simple-to-use, precision enteral feeding pump. It is easily programmed to provide patients with either continuous or
intermittent feeding, and can provide automatic ushing capability when used with KANGAROO ePump Feed & Flush Sets.
User Interface:
• Intuitive user interface
• Large, backlit LCD display
• Step-by-step prompts to guide programming and operation
• Stoplight LED array visually indicates pump status in a bright or darkened room
Ergonomics:
• Quiet operation
• Compact, portable design
• Tabletop usage , IV pole mounting or backpack
• Simple loading of Pump Sets
• Transparent side door to protect Pump Set
• Integrated handle for easy transport
Features:
• MISTIC (Magnetic Intelligent Set Type Identication Connector) Feed-Only vs. Feed & Flush Set identication system to ensure match between the pump’s user interface and
Pump Set type
• Automatic Anti-Free-Flow (AFF) System
• Audible alarm to indicate errors or Pump Set loading conditions
• Orientation-independent design eliminates need for drip chamber on pump set
• Sensor technology detects both upstream and downstream ow conditions
• Continuous feed, intermittent feed, and ush capability
• Auto-prime feature reduces the need for time-consuming manual priming
• Hold feature with restart and Keep Tube Open (KTO) feature
• Stores previous 72 hours of feeding and ushing history
• 15 languages
Service:
• Serial I/O port for data retrieval and software updates
• Uses replaceable, rechargeable NiMH Battery Pack for 15 hours of backup power
• Removable Power Cord
Menu
Selections
Menu
Selection
Buttons
Graphic
Display
Feeding Set Cap
Storage Area
Front
Door
Back
Battery
Compartment
Serial I/O Port
A/C Adapter Port
Pole Clamp
Attachment Point
Integrated Handle
Battery Status
Power Button
Output Totals
Input Settings
Status LEDs
Status Line