T254O222A
PTO
Safety
Cover
PTO Shaft
Cap
PTO SHAFT CAP
When the PTO shaft is not in use,
grease the PTO shaft and install the
cap to it.
►
It is dangerous to use an imple-
ment at a high speed if it is de-
signed to be operated at a low
speed.
Before using an implement,
make sure to read its owner's
manual.
•
•
CAUTION
DANGER
If caught by the PTO shaft, a
severe injury or even death
can occur.
Stay out of the PTO shaft
while it is rotating.
When the PTO shaft is not
in use, place the cap over it.
Also, never remove the PTO
safety cover.
•
•
•
T39O334B
LOADER VALVE AND JOY-
STICK LEVER
The loader valve is installed under
the step on the right side and the
joystick lever is installed on the
right section in the cabin for easy
installation and operation of a
loader.
►
To Next Page
Loading...
